KDX-6 Total CZPT Drilling Rig
I. A CZPT Introduction
KDX-six CZPT Core Drilling Rig,an up-to-date new merchandise, is a thoroughly new-typed drilling rig produced on the basis of the sophisticated strategies in the world. KDX-six is reasonable in style, outstanding in efficiency, effortless for procedure and practical for upkeep.
Major Features of the rig:
The rig, geared up with tracks, has a hydraulic driving technique. It owns a quick but superior composition, with its electrical power head driven by a variable motor and its velocity adjustable for two gears. With the oil cylinder functioning with a velocity-changeable chain, its performance is secure and dependable. The mast is adjustable in the variety from 0° to 90° to guarantee a suitable gap-drilling angle. The low gravity middle of the rig promises a regular operation. And it supplies the operators with a practical and comfy working circumstance with a wide see. In short, the rig has a stunning outline and displays a men and women-oriented design thought.
CZPT Good quality
The main components and auxiliary gear, including the engine, diesel engine, hydraulic pump, equipment reducer and some essential valves and hydraulic components, are all products with effectively-acknowledged manufacturers.
two) Large Performance
Massive torque, potent driving pressure, rational and practical layout, innovative controlling manner and a 6-meter-lengthy (19.seven ft) drilling rod promise the higher operation effectiveness of the rig.
Environmental Defense
The diesel engine is professionally developed to decrease noise and other contamination (The noise can not be more than 72db), which tends to make the rig proper to be operated in urban places.
Strength Conserving
The advanced strategy of loading-sensor-controlling will help the rig decrease its use of driving power and warmth discharge to the least extent.
KDX-six has an outstanding exterior physical appearance, a compacted composition, a dependable operate, and a flexible operating program. All these factors have made the rig the very best decision among the exact same items in both domestic and overseas markets.
Application Selection
KDX-six can be used to the two slant and vertical drilling. Becoming a rig outfitted with diamond and the carbide alloy bit drilling, it can be utilized in the fields of geology, metallurgy, coal mining, nuke sector and hydrology measuring.
II. Major Functionality Parameters of KDX-six
The figures in these tables have been calculated, based on discipline ordeals, and may be fairly expected.
Genuine drilling ability will rely on in-hold instruments and conditions, drilling strategies and tools used.
| Diesel Motor | Design | CZPT 6CTA (turbocharged and charge drinking water cooled) |
| Displacement | 8.3L (2.19 US Gallons) | |
| Energy | 178kW (240HP) | |
| Rated RPM(Manufacturing unit environment) | 2200rpm | |
| Drilling Ability | BQ | 2000 m(6560 toes) |
| NQ | 1600 m(5248 feet) | |
| HQ | 1300 m(4264 ft) | |
| PQ | a thousand m(3280 feet) | |
| Drill CZPT | Rotation Motor | CZPT CZPT Motor -variable and Reversible Maker: SAUER-DANFOSS |
| RPM | Two Shifts/ Stepless Alter -1100 RPM | |
| Ratios | 1st 8.776:1 2nd 2.716:one |
|
| CZPT Opener | sidewise sliding way with hydraulic push | |
| CZPT Chuck(PQ) | CZPTally opened, Disc CZPT Clamping, Usually C Shut Type Axial Holding Capacity of 222 400 N |
|
| Max. Torque6400 N·m(4717 lbf·ft) | ||
| Keep Diameter | 121 mm(four.76 inch) | |
| Max. Lifting capability of Spindle | 220 kN(49456 lbf) | |
| Max. Feeding Energy | 110 kN(24728 lbf) | |
| Principal Pump |
CZPT pump: Axial Piston variable displacement Triplex pump for driving of rotator, winch mud pump & leveling jacks. With load sensing technique. |
Maker: DANFOSS 1st Pump:200LPM at 31.5MPa 2nd Pump:120LPM at 28MPa 3rd Pump: 102 LPM at 16MPa |
| CZPT Tank | Potential | 420 L (111 US Gallons) |
| Capability of Primary CZPT | CZPTing Pace (one wire) | 38-70m/min(bare drum) |
| CZPTing pressure (solitary wire) | 120kN(26976 lbf) | |
| Steel Wire Diameter | 21.5 mm(.85 inch) | |
| Metal Wire Duration | 50 m(164 feet) | |
| Ability of Wireline CZPT | CZPTing Pressure (solitary wire) | fifteen kN(3372 lbf) (bare drum) |
| Metal Wire Diameter | six.3 mm(.25 inch) | |
| Metal Wire Size | 2000 m(6560 feet) | |
| Mast | Mast Height | 11 m(36 feet) |
| Mast Adjusting Angle | 0°-90° | |
| Drilling Angle | 45º off horizontal to 90ºvertical down |
|
| Feeding Stroke | 3800 mm(a hundred and fifty inch) | |
| Slippage Stroke | 1500 mm(59 inch) | |
| Feed Pull | 22000kg(48510 lb) | |
| Feed Thrust | 11000kg(24255 lb) | |
| Rod Pull | 3m or 6m(9.84feet or 19.68feet) | |
| Other | Bodyweight (system kind) | 14500 Kg(31973 lb) |
| Mud Pump | Variety | Reciprocating Pump Triplex Plunger |
| Design | BW320 | |
| Stroke | 110mm(four.3 inch) | |
| Output quantity | 320,230,165,118 L/min (eighty four.five, sixty one, 44, 31 US Gallons/min) |
|
| Discharge stress | four., 5., 6., 8.0 Mpa (580, 725, 870, 1160 psi) |
|
| Foot Clamp | Clamping Scope | 55.five-117.five mm(two.19-4.sixty three inch) via hole Ф154mm(six.06 inch) |
| Others | Fat | 14500 Kg(31973 lb) |
| Transportation Dimensions (L × W ×H ) | 5900×2240×2500mm (232.3×88.1×98.4 inch) |
|
| Transportation Way | Steel Crawler |
