Automatic Foil Stamping and Stripping Die Cutting Machine

Automatic Foil Stamping and Stripping Die Cutting Machine


We made 1050ESF Automated Foil Stamping and Stripping Die Reducing Device, which is the finest research and advancement and production of new gear with a higher degree of intelligence.

This equipment adopts many superior pneumatic and servo driving processing technology from abroad. Soon after the rigorous assembly quality control, it has gain of basic operation and secure reputable.

It could foil stamping, creasing and die reducing following printing items, these kinds of as much more than 80g/m2 paper, cardboard, corrugated paper under 4mm, pasting paper, laminating paper and so on.

Good good quality and layout helps make equipment perform stably and protection when machine’s velocity get to 7500 sheets/h. This equipment will give you to take pleasure in the relaxed procedure and quicker return on expense.


Machine functions:

1.Feeder/Feeding Section


The design of stacker preparatory phase was enhanced, it could use ready automobile sheet piling. Also could use common hydraulic vehicle sheet 


piling to stacker right. The machine has 4 suction nozzles and four sending nozzles in feeder, guarantee feed smoothly. Undertake import 


screw air-blowing unit, it could make the sheet ship effortlessly.


2.Computerized Sheet Piling Place Technique

The sheet pre-pile plate will be moved to fixed position routinely when you enter the sheet dimension. It is really hassle-free for operator to load the paper.


three. Feeding Positioning Part       


The incline-variety paper shifting table best is far more suited to higher-velocity thin paper and location. Aspect place undertake dual objective side device with pull information and drive manual, accounting to paper pick, it makes switch easier. It could switch front rise place arriving reduction of velocity system, it is advantage of slim paper’s area.


four.Foil Feeding Area

Vertical: three shafts (A/B/C)

Horizontal: two shafts (E/F)


5.Foil Stamping/ Die Chopping Plate Rapid Altered Area

Operator could adjust foil stamping plate to die reducing plate rapidly by way of this system.


6.Foil Stamping/ Die Cutting Segment


Foil Stamping Plate


Die Chopping Plate

The driving gear makes certain large speed of die reducing together. The pneumatic locking mechanism and air clutch are fast and stable. The die cutting frame can avert the die slicing plate from drooping or separating properly.


seven.CZPT Equipment Cabinet


All main electric powered appliances have been imported from international international locations, make confident machine running easily and stably.

 Yaskawa Servo drives from Japan


8.Distant Management Method


Right after connecting the net, by way of this technique we could remote handle this machine then fix difficulties for customers.


9.Supply Area


Shipping and delivery area incorporate tester into stability technique. It is outfitted with inset counter. Utilizing subsection could change brush and sheet air-blowing gadget, so the finished item of shipping section could item stably. Gripper travel train expanded buffer device.


Other critical features:

one. Pneumatic Clutch

The imported high top quality pneumatic clutch minimizes noise and minimizes influence when halting the device at a high speed.


two. Lubrication Technique

With a programmable lubrication method, the accurate management of PLC guarantees balanced lubrication of the machine.


three. Air Pump

Adopt imported gear, improve the stability of the equipment, reduced sounds, large performance, lengthy service lifestyle.


four. Gripper and Chain


The grippers are made of particular additional tough aluminum alloy, with anode therapy on the floor, guaranteeing precise die chopping and embossing, ect. at higher speed. The adjustment mechanism, patent style ensures really precise management. An imported chain is employed for the principal gripper transmission, with strength improved by forty five% for correct steadiness and extended existence.


Model 1050ESF
Max. Sheet Size 1050×750mm
Min. Sheet Size 400×360mm
Max. Cutting Size 1040×720mm
Max. Foil Stamping Size 1040×720mm
Paper Thickness eighty-2000 g/m2 Cardboard
Corrugated paper≤4mm
Min. Waster Side Width 8mm
Max. Mechanical Speed 7500 sheets/h
Max. Foil Stamping Speed 6500 sheets/h
Max. Die Cutting Pressure 420T
Max. Feeding Pile Height 1540mm
Max. Delivery Pile Height 1340mm
Total Weight 22T
Dimensions(with pre-pile device) 8000×6000×3000mm
Heated System Zone 12
Stamping Temperature Range 0°C-200°C
Foil Feeding Shaft V3+H2
Total Power 70kw
Air compressor .8Mpa, ≥0.6m3/min

You can find much more equivalent details in other connected goods.

Automatic Foil Stamping and Stripping Die Cutting Machine

Contact Us

bush chains

As one of leading motor coupling manufacturers, suppliers and exporters of mechanical products, We offer bush chains and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

Recent Posts