500ml Aluminum Canning Production Line for Juice and Milk

Very hot filling cHangCZPT creation line for juice and milk

 

* Empty can depalletizer

XD series automatic depalletizer is appropriate for automated unloading empty stacks. The stack of vacant cans on the pallet will be lifted and pushed on to the conveyor and supporting the use of can rinser, which is an best equipments for medium ability canned beverages generation.

 

* CZPT Functions

 

1. Replace the traditional manual to row empty can, which can save a good deal of labor and increase manufacturing ability. 

two. The use of programmable computer control technique to improve the accuracy of mechanical movement and easy operation. 

three. Pallet raise table features self-locking carry. Pallet packing device employs pneumatic cylinder raise with stable motion.

four. Can pushing can select continuous motion or solitary cycle procedure.

five. Applies to all sizes of tin cans and aluminum cans of unloading operations.

 

  • Empty can washer

 

 

* CZPT functions:

It is used to clean empty can in cHangCZPT production line. Empty cans will be sent to turning system 1st, which will be turned about then transferred into rinsing machine. Empty can will be managing from leading to bottom along the turning system. When empty cans enter into rinser, they will be cleaned by h2o (presented by client) to achieve aseptic status. There is specified inclination angle in equally sides of rinser, whose size could be modified properly when needed. Vacant cans will be rolling in parallel way from prime to finish the waste h2o will be discharged from outfall.

 

  • Filling & Seaming 2-in-one for hot filling can

  •  

It is suited for filling and seaming non-carbonated liquid these kinds of as drinking water, juice, purposeful beverage, and many others. It is outfitted the advanced system, electrical products, and pneumatic management engineering. It has the characteristics of filling reposefully, substantial speed, liquid degree management, seaming reliably, frequency conversion timing, much less content reduction. It is the desired tools for beverage crops.

Features

 Wholly sealed widow construction which is gorgeous, concise, effortless and very operated

  Product tank layout with precision polishing within

  High precision and big circulation charge filling valves to fulfill effective necessity

  Specially created roller composition which is simple to be altered, locked and guarantee sealing purpose

  Friendly and convenient operating panel with higher expansibility.

 

Doing work Treatment

Cans will be pushed into can holding platform one particular by one by feeding screw and star-wheel. Centering cup of filling valve will fall to can the distance in between filling valves and cans is sealed by springiness plastic ring. The movement of centering cup is generated by plastic idler wheel alongside curvilinear movement. Following loaded, valve will be shut and centering cup will rise from the can. Stuffed can will be sent to conveyor chain, then to seamer. Seamer will just take lid, turn over the edge of can and turn the edge to end the sealing motion by the handle of cam. Following that can will be transferred to conveying system.

 

Can Infeed
 

Mixture of infeed screw and starwheel.

 

Filler


 

 

Seamer

 

 

Can Outfeed

Nylon wheel and conveyor belt cooperate output cans. CZPT motor makes use of frequency handle of motor speed, which keeps speed with the 2-1 equipment.

Rack component

Rack is welded by higher good quality carbon metal, Antirust processing and spray surface. The surface area is covered by the SUS304.

 Electronic manage program component

The electronic factors like PLC and transducer are from Mitsubishi, Omron, and so forth., The pneumatic devices are also from intercontinental well-known manufacturer.

Products construction

   Rack

   Rotary filler

   Rotary seamer

   Aluminum infeed and outfeed method

   Control

Principal Specification

Contact monitor:  Weinview
   PLC system controller:  Mitsubishi
   Inverter:  Mitsubishi
   Photoelectrical controller:  Autonics
   Proximity change:  Autonics
   Other electrical components:  Schneider
   Pneumatic ingredient:  Airtac
   Main motor:  Siemens
   CZPT:  HangCZPT

*Shrink wrapping device with 50 % tray

Doing work treatment :

 Bottle hander movie wrapping: through bottle handing pole manage every single team bottle movement distance, allow it synchronization with movie lifting pole, and let bottle thrust to film wrapping segment belt movie lifting pole and movie lifting device match torsion limit stopper, while bottle fall or bottle block, limit stopper motion allow machine automobile quit,  after failure fix, then change limit stopper hand wheel reset.

 Mechanism rotation: the equipment rotation drove by servo motor, undertake to synchronous belt and chain rotation assembly approach, make sure rotation harmony, the place that undertake to chain ration all add protection covet and lubricate system, make sure worker safe and circumstance thoroughly clean.

Have the operate: whilst absence bottle, the device will alarm, no bottle no film feeding perform

 
Controlling system:

adopt to PLC and touch display managing, have manual. Car move approach, contact screen have full device manipulation function, can screen instantaneous and gathered package amount, and allow can print with the connected printer.  Placing method is a lot more rapid and precise controlling panel undertake to electronics touch and manage button managing, can immediately enter and revise deal kind parameter, also can preserve diverse package specification parameter timely supervise facility operation total approach. All the working method all have sensor checker, have moi diagnose function, if have any breakdown, facility will vehicle cease, alarm mild blink, display breakdown variety indicator on the contact monitor widespread sort reducer motor matching frequency transducer, total machine limitless speed adjust, transfer transmiss

 

Any inquiries, please really feel totally free to inform us at any time.

 

500ml Aluminum Canning Production Line for Juice and Milk